ASTM A53 Carbon Steel Pipe And Steel Tube

QUALITY ASSURANCE :

  • Check Mark All products are produced by large factories
  • Check Mark Professional quality inspection tracking team
  • Check Mark Can accept any third party inspection
  • Check Mark Accept third party supervision
Categories: , Tags: , , , , , , ,

ASTM A53 carbon steel Pipe And Steel tube

ASTM A53 Carbon steel pipe covers seamlesswelded black and hot-dipped galvanized steel pipe。 In NPS 1/8″ to NPS 26.  A 53 is intended for pressure and mechanical applications.  And is also acceptable for ordinary uses in steam, water, gas, and air lines.

ASTM A53 Carbon Steel Pipe And Steel Tube comes in three types (F, E, S) and two grades (A, B).

A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (grade A only)

A53 Type E has an electric resistance weld (Grades A and B)

A53 Type S is a seamless pipe and found in Grades A and B)

A53 Grade B Seamless is our most polar product under this specification and a53 pipe is commonly dual certified to a106 B Seamless pipe

chemical Properties %:

Grade C, Mn, max P, S, Cu*, Ni*, max Cr*, max Mo*, max V*, max
max max max max
Type S(Seamless) A 0.25 0.95 0.05 0.05 0.4 0.4 0.4 0.15 0.08
B 0.3 1.2 0.05 0.05 0.4 0.4 0.4 0.15 0.08
Type E (Electric resistance Welded) A 0.25 0.95 0.05 0.05 0.4 0.4 0.4 0.15 0.08
B 0.3 1.2 0.05 0.05 0.4 0.4 0.4 0.15 0.08
Type F                                   (Furnace-welded) A 0.3 1.2 0.05 0.05 0.4 0.4 0.4 0.15 0.08

*The total composition for these five elements shall not exceed 1.00%.

Mechanical properties:

Grade Rm Mpa Tensile strength Mpa Yield Point Elongation Delivery Condition
A ≥330 ≥205 20 Annealed
B ≥415 ≥240 20 Annealed


Dimensional Tolerances:

Pipe Type Pipe Sizes Tolerances
Cold drawn OD ≤48.3mm ±0.40mm
WT ≥60.3mm ±1%mm


size range:

NPS OD WT
INCH MM SCH10 SCH20 SCH30 STD SCH40 SCH60 XS SCH80 SCH100 SCH120 SCH140 SCH160
1/2″ 21.3 2.11 2.41 2.77 2.77 3.73 3.73 4.78
3/4″ 26.7 2.11 2.41 2.87 2.87 3.91 3.91 5.56
1″ 33.4 2.77 2.9 3.38 3.38 4.55 4.55 6.35
1.1/4″ 42.2 2.77 2.97 3.56 3.56 4.85 4.85 6.35
1.1/2″ 48.3 2.77 3.18 3.68 3.68 5.08 5.08 7.14
2″ 60.3 2.77 3.18 3.91 3.91 5.54 5.54 8.74
2.1/2″ 73 3.05 4.78 5.16 5.16 7.01 7.01 9.53
3″ 88.9 3.05 4.78 5.49 5.49 7.62 7.62 11.13
3.1/2″ 101.6 3.05 4.78 5.74 5.74 8.08 8.08
4″ 114.3 3.05 4.78 6.02 6.02 8.56 8.56 11.13 13.49
5″ 141.3 3.4 6.55 6.55 9.53 9.53 12.7 15.88
6″ 168.3 3.4 7.11 7.11 10.97 10.97 14.27 18.26
8″ 219.1 3.76 6.35 7.04 8.18 8.18 10.31 12.7 12.7 15.09 18.26 20.62 23.01
10″ 273 4.19 6.35 7.8 9.27 9.27 12.7 12.7 15.09 18.26 21.44 25.4 28.58
12″ 323.8 4.57 6.35 8.38 9.53 10.31 14.27 12.7 17.48 21.44 25.4 28.58 33.32
14″ 355.6 6.35 7.92 9.53 9.53 11.13 15.09 12.7 19.05 23.83 27.79 31.75 35.71
16″ 406.4 6.35 7.92 9.53 9.53 12.7 16.66 12.7 21.44 26.19 30.96 36.53 40.19
18″ 457.2 6.35 7.92 11.13 9.53 14.27 19.05 12.7 23.83 39.36 34.93 39.67 45.24
20″ 508 6.35 9.53 12.7 9.53 15.09 20.62 12.7 26.19 32.54 38.1 44.45 50.01
22″ 558.8 6.35 9.53 12.7 9.53 22.23 12.7 28.58 34.93 41.28 47.63 53.98
24″ 609.6 6.35 9.53 14.27 9.53 17.48 24.61 12.7 30.96 38.89 46.02 52.37 59.54
26″ 660.4 7.92 12.7 9.53 12.7
28″ 711.2 7.92 12.7 15.88 9.53 12.7