UNS N07718
QUALITY ASSURANCE :
- All products are produced by large factories
- Professional quality inspection tracking team
- Can accept any third party inspection
- Accept third party supervision
1.Standard:ASTM B637
2.Chemical Composition (%)
Elements | C | Mn | P | S | Si | C | Mo | Ni | Ti | Nh+T | Fe | B | AI |
Min | 17.0 | 2.8 | 50.0 | 0.65 | 4.75 | 0.2 | |||||||
Max | 0.08 | 0.35 | 0.015 | 0.015 | 0.35 | 21.0 | 3.3 | 55.0 | 1.15 | 5.50 | remainder | 0.006 | 0.8 |
Actual value | 0.037 | 0.21 | 0.005 | 0.008 | 0.13 | 18.29 | 2.92 | 53.74 | 0.79 | 4.82 | 17.47 | 0.0025 | 0.69 |
Mechanical Propertie | Tengile Strenctr WFa |
Yield 5trength NF |
Elongatiom% | Grain Size |
Min | 793 | 758 | 12 | 4 |
Max | 965 | |||
Actual value | 1275 | 932 | 32 | 5 |
4.Typical Size
Size mm | Outside Diamete mm |
Tolerance of Outside Lhamete mm |
Wall thickness mm |
Tolerance of Wall Thickness Mm |
115×11 | 115 | ±0.69 | 11 | ±8.0% |
Note : Standard requirements control range : OD : ± 0.515mm.WT : ± 12.5%
5.Typical Application Environment
UNSN07718 can be widely used in all kinds of high requirements of working condition due to its high temperature strength. excellent carrasion resistance at 700 ℃ .
Uses:Steam turbine.Liquid fuel rackets.Cryogenic engineering Adidic environment Nudear engineering